Mining Machinery

Mjlb37 Underground Mining Chain Mining Coal Cutter Cutting Machine Price

Shandong China Coal Industrial & Mining Supplies Group Co., Ltd.
  • After-sales Service:Video or Technical Support
  • Model:Mj37
  • Traction Method:Wire Rope Traction
  • Adustment Method:Hand Artery Movement
  • Traction Speed:0-920mm,Min
  • Groove Depth:800~1000mm

Base Info

  • Model NO.:MJLB37
  • Cut Chain Line Speed:2010-2040m,S
  • Transport Package:as Customers Requirement
  • Trademark:chinacoal
  • Origin:China
  • Production Capacity:100 Sets Per Mont

Description

Basic Info.

Model NO. MJLB37 Cut Chain Line Speed 2010-2040m/S Transport Package as Customers Requirement Trademark chinacoal Origin China Production Capacity 100 Sets Per Mont

Product Description

Introduction of MJLB37 Type H39 Chain Mining Coal Cutter (Water-Cooled Type)


The machine is small in size, light in weight, low in noise, good in dustproof effect, stable in operation, compact in structure, convenient in installation, operation and maintenance, convenient in moving direction, safe and reliable in use.
The electrical parts of the machine have certain explosion-proof performance, and the motor cooling method is water-cooled.
Compared with manual coal mining, this machine can greatly improve the coal block rate, save mining and time, and can significantly improve economic benefits for enterprises. It is the best equipment for mining ultra-thin composite coal seams for artificial gutters.

Application of MJLB37 Type H39 Mining Chain Coal Cutter (Water-Cooled Type)


This machine is used in the general medium and small mines under the gently inclined thin coal seam, the ultra-thin composite coal seam coal mining face to cut the bottom trough, to achieve the role of caving.
This machine can be used in mines where the ambient air content of methane, coal ash, hydrogen sulfide, carbon dioxide, etc. does not exceed the safety content specified in the Coal Mine Safety Regulations. This machine is used for the mining of complex coal seams. It can be used to cut the bottom groove in the working face with a height above 0.45 meters.
Suitable for coal seam hardness f ≤ 4 ° working surface.
 It is suitable to tilt the angle a<25° working face along the bottom wall of the coal wall.

Parameter of MJLB37 Type H39 Mining Chain Coal Cutter (Water-Cooled Type)

Adustment methodHand artery movementWorking methodWorking back and forth along the coal wall
Traction methodWire rope tractionMotor ModelYBC-37
Traction speed0~920mm/minMotor Power37KW
Groove depth1000±50mmRated voltage380V/660V
Cut chain line speed1900mm/sDimention2235*490*390mm
Rope capacity2500mWire rope specification6*37
Traction30.66KNTotal weight1230±2kg
Traction power9kwCutting power28kw
cooling methodWater coolingNo-load lowering speed4184mm/min
cooling methodSpiral waterway inside coolingWorking methodWorking back and forth along the coal wall
DustproofCooling water cutting section dustproofLubrication methodContinuous pressureless lubrication
 
 
 

Photos of MJLB37 Type H39 Mining Chain Coal Cutter (Water-Cooled Type)

Mjlb37 Underground Mining Chain Mining Coal Cutter Cutting Machine Price
Mjlb37 Underground Mining Chain Mining Coal Cutter Cutting Machine Price
Mjlb37 Underground Mining Chain Mining Coal Cutter Cutting Machine Price
Mjlb37 Underground Mining Chain Mining Coal Cutter Cutting Machine Price
Mjlb37 Underground Mining Chain Mining Coal Cutter Cutting Machine Price
Mjlb37 Underground Mining Chain Mining Coal Cutter Cutting Machine PriceMjlb37 Underground Mining Chain Mining Coal Cutter Cutting Machine Price