• Model NO.：MJLB15
• Cut Chain Line Speed：2010-2040m,S
• Transport Package：as Customers Requirement
• Trademark：chinacoal
• Origin：China
• Production Capacity：100 Sets Per Mont

Basic Info.

Model NO. MJLB15 Cut Chain Line Speed 2010-2040m/S Transport Package as Customers Requirement Trademark chinacoal Origin China Production Capacity 100 Sets Per Mont

Product Description

Introduction of MJLB37 Type H39 Chain Mining Coal Cutter (Water-Cooled Type)

The machine is small in size, light in weight, low in noise, good in dustproof effect, stable in operation, compact in structure, convenient in installation, operation and maintenance, convenient in moving direction, safe and reliable in use.
The electrical parts of the machine have certain explosion-proof performance, and the motor cooling method is water-cooled.
Compared with manual coal mining, this machine can greatly improve the coal block rate, save mining and time, and can significantly improve economic benefits for enterprises. It is the best equipment for mining ultra-thin composite coal seams for artificial gutters.

Application of MJLB37 Type H39 Mining Chain Coal Cutter (Water-Cooled Type)

This machine is used in the general medium and small mines under the gently inclined thin coal seam, the ultra-thin composite coal seam coal mining face to cut the bottom trough, to achieve the role of caving.
This machine can be used in mines where the ambient air content of methane, coal ash, hydrogen sulfide, carbon dioxide, etc. does not exceed the safety content specified in the Coal Mine Safety Regulations. This machine is used for the mining of complex coal seams. It can be used to cut the bottom groove in the working face with a height above 0.45 meters.
Suitable for coal seam hardness f ≤ 4 ° working surface.
 It is suitable to tilt the angle a<25° working face along the bottom wall of the coal wall.

Parameter of MJLB37 Type H39 Mining Chain Coal Cutter (Water-Cooled Type)

Adustment method	Hand artery movement	Working method	Working back and forth along the coal wall
Traction method	Wire rope traction	Motor Model	YBK-160L-4
Traction speed	0~920mm/min	Motor Power	15KW
Groove depth	800~900mm	Rated voltage	380V/660V
Cut line speed	1900mm/s	Dimention	1800*390*280mm
Rope capacity	2000m	Wire rope specification	6*37
Traction	15.33kn	Total weight	750±2kg
Traction power	5kw	Cutting power	10kw
cooling method	Water cooling	No-load lowering speed	4018mm/min
cooling method	Spiral waterway inside cooling	Working method	Working back and forth along the coal wall
Dustproof	Cooling water cutting section dustproof	Lubrication method	Continuous pressureless lubrication

Photos of MJLB37 Type H39 Mining Chain Coal Cutter (Water-Cooled Type)