• Condition：New
• Warranty：2year
• After-sales Service：2year
• Installation：Engineer′s Guide
• Spare Parts Supplying：Lifelong Provide
• Marketing Type：Hot Sale
• Transport Package：Nude & Wooden Box
• Specification：900-1600mm
• Trademark：Sinonine
• Origin：China
• HS Code：8474209000
• Production Capacity：300sets Per Year

Basic Info.

Condition New Warranty 2year After-sales Service 2year Installation Engineer′s Guide Spare Parts Supplying Lifelong Provide Marketing Type Hot Sale Transport Package Nude & Wooden Box Specification 900-1600mm Trademark Sinonine Origin China HS Code 8474209000 Production Capacity 300sets Per Year

Product Description

The wet pan mill is a new mill, small investment, high yield, the production cost is low, good benefits.

The wet pan mill is named by the diameter of roller. Φ1300,Φ 1350,Φ 1400,Φ 1500,Φ 1600 is suitable for selection of iron ore, molybdenum ore ,lead ore ,zinc ore, antimony ore and so on. Φ 850, Φ 900, Φ 1000,Φ 1100,Φ 1200 is suitable for selection of gold ore.
As their small investment, high yield, the production cost is low, good benefits, praised by users, domestic alternative to the ball mill equipment. Grind gold machine easy installation and maintenance, small investment, high yield, quick, low-cost production, is the ideal equipment for mineral beneficiation.

Wet pan mill Application area
Mainly used with gold, silver, lead, zinc, iron, molybdenum, copper, antimony mine, mine, all ball mill can be selected grind gold machine can be used. Characteristics: grind gold through the raw material mixing, rolling, crushing. Rolling repeatedly reach moisture equilibrium ratio of uniform, low gas content, improve the forming rate and forming quality, grind the material through the machine molding Products with high density, good strength, no porosity ratio weight. Energy efficient, high volume of output, the product is used for iron ore process tailings recovery, not to slag the loss of effective resources can be fully utilized.

Wet Pan Machine Use and Maintenance
1.The normal operation of the mill, before they start feeding.
2.this machine prohibit strip start, the outage at boot time, you must first clean up the residual ore in the middle of the milled slot and then start.
3.should be uniform feeding not erratic, it is best to use the feeder.
4. Bearing frequent butter, gear box or car rear axle with frequent checks whether the loss of gear oil.

5.Regular checks of the various parts of the screw is loose.
6.Found bearing damage must be promptly replaced, shaft eccentric avoid damage to other parts.
7.Pan mill runtime to pay attention to that the reducer or bearing part of the presence or absence of abnormal sound, whether the temperature is too high, the motor current is too large irregularities. 

Specification of wet pan mill

Model	Feed size	Discharge size (mm)	Capacity (t/h)	Power (Kw)	Pan dia x thickness (mm)	Disc dia x thickness (mm)	Hopper dimension (mm)
Φ900	<15mm	0.6-0.07	0.1-0.4	3	900x170	1700x110	2300x2300x700
Φ1000	<20mm	0.6-0.07	0.5-0.8	5.5	1000x170	1800x100	2400x2400x900
Φ1200	<20mm	0.6-0.07	0.8-1.2	7.5	1200x200	1800x100	2400x2400x900
Φ1400	<20mm	0.6-0.07	1--3	18.5	1400x250	2000x200	2400x2400x900
Φ1500	<30mm	0.6-0.07	2--5	22	1500x3502	2000x200	2800x2800x1100
Φ1600	<30mm	0.6-0.07	4--6	30	1600x400	2200x200	2850x2850*x1100