• Model NO.：MYC
• Warranty：2 Years
• Color：Multi Color
• Customized：Customized
• Condition：New
• After-sales Service：1 Year Warranty Under Normal Use Condition
• Transport Package：Packed in Seaworthy Carton for Export
• Trademark：MYC
• Origin：China
• HS Code：84313900
• Production Capacity：2000

Basic Info.

Model NO. MYC Warranty 2 Years Color Multi Color Customized Customized Condition New After-sales Service 1 Year Warranty Under Normal Use Condition Transport Package Packed in Seaworthy Carton for Export Trademark MYC Origin China HS Code 84313900 Production Capacity 2000

Product Description

Belt cleaner installed on both head and bottom of the conveyor and can clean the meterials sticking to the surface of the belt.
Cleaner is a kind of cleaning device for adhesive and massive large materials of belt conveyor. The main function of the cleaner is to reduce the excessive wear of the conveyor belt and reduce energy consumption.
1: Keep the conveyor belt clean, ensure that the conveyor belt has enough friction on the transmission drum, and prevent the conveyor belt from slipping and deviation;
2: Effectively reduce the wear of conveyor belt and idler caused by viscous and large materials, and effectively prolong the service life of conveyor belt and idler;
3: Ensure that the conveyor belt runs smoothly without jumping up, down, left and right and tearing the conveyor belt;
4: With the reduction of stickiness, it can effectively protect the bearing idler, bracket, transmission drum and steering drum, ensure the normal operation and reduce the maintenance rate of conveying equipment.
The cleaner of belt conveyor can be roughly divided into three parts: head cleaner, middle cleaner and tail cleaner. They have different division of labor and functions.
• head cleaner
The head cleaner is used for cleaning the return belt of the belt unloading drum. The cleaner is matched with the belt conveyor, and the cleaner is matched with heavy hammer tightening or spring tightening.
Quantity: 1 ordinary belt conveyor and 2 strong belt conveyors.
Cleaning medium: ordinary belt conveyor uses rubber strip, and strong belt conveyor uses alloy or polyurethane.
• Middle cleaner
It is also used to clean the non working surface of the belt, so that the materials stuck on the lower belt surface can be transferred to the lower idler and steering roller as little as possible.
Installation position: within 5 meters behind the unloading point in the middle of the belt, or 2 / 3 of the belt conveyor body (from the head).
Quantity: at least one ordinary belt conveyor and at least two strong belt conveyors.
Cleaning medium: ordinary belt conveyor uses rubber strip, and strong belt conveyor uses rubber strip or polyurethane.
• Tail empty section cleaner
Be responsible for cleaning the non working surface in front of the tail of the belt conveyor.
Quantity: at least one.
Cleaning medium: ordinary belt conveyor uses rubber strip, and strong belt conveyor uses rubber strip or polyurethane.
Installation position: within 5m in front of the tail buffer idler frame.
According to the structure, the common belt cleaner mainly includes: scraper type, rotary type, water spray type, brush type, etc; According to the materials used, it mainly includes polyester ammonia cleaner, NiTi aluminum alloy, alloy rubber cleaner, etc; According to the working principle, there are mainly mechanical type and electric type.
After the cleaner is installed and used for a period of time, the cutter head of the cleaner is likely to be worn to varying degrees due to frequent friction with the belt surface. After wear, there will be a certain gap between the cutter head and the belt. When the fit between them is not enough, it is easy to lead to poor belt cleaning effect. The cleaner shall be inspected frequently. If the cutter head of the cleaner is found to be seriously worn, the cutter head shall be adjusted or replaced in time to ensure its cleaning effect and prevent belt return and material.