• Model NO.：50-1450 Tph
• Condition：New
• Warranty：a Year
• After-sales Service：Twenty Four Hour Online
• Roller Press：Cement Roller Press
• Output Size mm：<2mm 65% <0.08mm 25%
• Capacity：50-1450 Tph
• Transport Package：Simple Packaging
• Trademark：LYZT
• Origin：Luoyang, Henan
• Production Capacity：200PCS,Year

Product Parameters

1. The press roller surface adopts hard alloy stud setting-in structure to increase the life time of the roller sleeve
2. Universal coupling-planetary retarder-press roller to consist of shaft flexible drive system
3. Compound structure of non-contact sealing and contact sealing are adopted at the side of the press roller
4. Unique ellipse structure is used for the feeding pipe to make the feeding process smooth
5. Oil spray lubrication system is used for the lubrication of the main bearing
6. The main bearing adopts inner passage fully-sealing structure for cooling
7. The hard alloy welding press roller surface or setting-in surface are available depending on the user's need.
Our Advantages

A driving force: reasonably stressed.
The drive power is transferred to the grinding rollers via multi-stage planetary gearboxes with first stage spur gears. The gearboxes are mounted on the drive end of the roller shaft using a hydraulic shrink coupling.. A V-belt drive can be used for drives of up to approx. 400kW per motor. Drives above 400kW are equipped with fluid or safe set coupling and cardan shaft.
A framework you'll work better with.
The machine frame has identical upper and lower tiebars. Rubber pads are placed between the roller bearing blocks and the frame ends. The rubber pads act as an articulated joint and have a vibration damping effect. The RPS-type as a special type reduces maintenance time during roller changes. The doors in the roll cover permit rapid and wide access to the rollers for inspection and maintenance.
Roller Presses: roller support
A question of the right bearings.
Roller Press rolls and bearings.
In LYHMC Roller Presses, the rollers are supported in radial, multi-row cylindrical roller bearings. This ensures an even load distribution on the roller bearing, substantially increasing the life of the bearing.
Additional long life design features of LYHMC Roller Presses include:
Generously sized bearing load factor
Continuous feeding of filtered lubrication oil
Bearings cooled by the lubrication oil for low bearing temperature
Bearing sealing with fixed radial shaft sealings arranged back to back
Additional permanently greased labyrinth with V- ring and separate dust
labyrinth on the inner side of the bearings.
Oil lubricated roller bearings are standard with all LYHMC  Roller Presses. All contact points on the cylindrical roller bearing are supplied evenly with lubrication. Operating cost can be further reduced by checking the state of lubricant regularly (alternative grease lubrication).
 
LYHMC Roller Presses offer rollers with appropriate wear protection for almost all applications in the cement and minerals industry. The two-part roller consisting of shaft and tire allows for economical surface replacement, single part rollers are used for high temperature grinding:
Multi-layer welding enables long running times without stoppages.
The complete hard face welded surface is used for feed material of normal wear characteristic. Surface repair can be carried out quickly.
The surface with hard-alloy studs is used for extremely abrasive materials.

Model
 Rolle  DIA
 mm
Roll width
(mm)
Main motor
(mm)
Feed Size
mm
Output Size
mm
Production capacity   t/h
Weighet/t
Size  mm
L
W
H
RP1003
Φ1000
300
160*2
25/40
<2mm
65%
<0.08mm
25%
50-70
33
3835
4510
1885
RP1004
400
200*2
25/40
65-90
36
4080
4600
1920
RP1006
630
315×2
25/40
105-145
55
4526
5280
2200
RP1204
Φ1200
450
220×2
30/50
95-130
62
5500
4470
2340
RP1205
500
250×2
30/50
140-165
64
5550
4620
2390
RP1208
800
455×2
30/50
180-230
90
5608
5500
2460
RP1406
Φ1400
650
455×2
35/60
225-290
104
7205
5440
2610
RP1408
800
500×2
35/60
283-362
125
7400
5780
2610
RP1410
1000
630×2
35/60
420-460
135
6400
8990
3000
RP1509
Φ1500
900
710×2
35/60
340-460
163
6610
8860
3490
RP1614
Φ1600
1400
1000×2
35/60
650-750
190
7000
9320
3980
RP1714
Φ1700
1400
1250×2
40/70
710-830
240
7230
9420
4100
RP1816
Φ1800
1600
1600×2
45/80
800-1000
278
8000
11100
4550
RP2018Φ200018002000x2  1250-1450   
FAQ

After Sales Service

ZTIC Heavy Industries is your business partner in the After Market.
ZTIC  able to provide:
1.    ENGINEERED SPARES -  DESIGN AND MANUFACTURING
2.    LARGE VOLUME STEEL AND IRON CASTING FOUNDARIES
3.    HUGE MACHINE SHOP CAPABILITIES
4.    TRAINING PROGRAMMES
5.    PREVENTATIVE MAINTENANCE PROGRAMS
6.    PREVETATIVE MAINTENANCE SERVICES
7.    COMPREHENSIVE MAINTENANCE PROGRAMS
ZTIC's Field Service Engineers are trained specifically in the CITIC brand group products but are capable of undertaking the servicing of other OEM brands.
Our technicians are equipped with the most advanced technological diagnostic equipment available to trouble shoot your equipment to optimise performance and minimise down time.
ZTIC also has an extensive capability in supplying all you consumable and electrical/ mechanical spare part needs.