• Model NO.：TH
• Warranty：1 Year
• Color：Multi Color
• Customized：Customized
• Condition：New
• Load Capacity：15-456m3,H
• Modle：Th160,250,315,400,500,630,800,1000
• Voltage：Variable
• Motor Brand：ABB, Sew or Customized
• After-Sales Service Provided：Engineers Available to Service Machinery Overseas
• Bucket Volume：1.2-58L
• Bucket Speed：1.2-1.6m,S
• Bucket Pitch：500-920mm
• Max. Material Particle Size：70mm
• Chain Quantity：2
• Transport Package：Standard Package
• Specification：ISO9001: 2008, CE, SGS, TUV, BV
• Trademark：PK
• Origin：Henan, China (Mainland)
• HS Code：8428391000
• Production Capacity：300sets,Year

ModelTH160TH200TH250TH315TH400TH500TH630TH800TH1000Bucket TypezhshzhshzhshzhshzhshzhshzhshzhshzhshCapacity (m3/h)152518293148468080125100157152246177280294456Bucket Width (mm)1602002503154005006308001000Bucket Volume (L)1.21.91.52.434.63.865.99.59.315152423383858Bucket Pitch (mm)500512688920Chain Specification (diameter×pitch) /mm14×5018×6422×8626×92Chain Quantity2222Single Chain Broken Load /kN≥190≥320≥480≥570Bucket Speed (m/s)1.21.41.51.6Driving Pulley Diameter (mm)30036552063071080090010001250Driving Shaft Rotation Speed (r/min)69.7163.2244.1142.537.635.831.830.524.4Max. Material Particle Size (mm)202530354050606570
Safe Installation
The bucket elevator must be securely mounted on a solid concrete foundation. Concrete foundation surface should be flat and present as a horizontal state to ensure well-installed bucket elevator can achieve vertical requirements. Middle and upper casing section of a higher height bucket elevator should be connected with the neighbouring buildings in order to increase its stability. Firstly, please install the lower part, fix the anchor bolt, and then install the middle casing and upper casing. After complete the installation, please adjust and correct the vertical height, upper and lower shaft should be parallel to each other, and shafts should be in the same plane. When install the bucket elevator with a lower height , you can connect the upper ,middle and lower casing well first on the ground, and then hang the complete set vertically and fix it on the concrete foundation.
After completing the installation of casing, you can install the chain and bucket. The u-shape screw which is used for connect the buckets, it is not only a chain connector, but also a fixture of buckets. U-screw nuts must be tighten and locked securely, after the installation of chain and bucket, please adjust it to get a proper tension.
Add the appropriate amount of oil or grease in the gearbox and bearing respectively, reducer should be lubricated with industrial gear oil, bearing seat can be lubricated with calcium or sodium base grease.