• Model NO.：900*1800
• Condition：New
• OEM：Yes
• Transport Package：No Package
• Specification：4000*2000*1500mm
• Trademark：WKD
• Origin：China
• HS Code：8474100000
• Production Capacity：100sets,Month

Basic Info.

Model NO. 900*1800 Condition New OEM Yes Transport Package No Package Specification 4000*2000*1500mm Trademark WKD Origin China HS Code 8474100000 Production Capacity 100sets/Month

Product Description

Introduction
 Grinding ball mill machine works on the principle of impact: size reduction is done by impact as the balls drop from near the top of the shell. A grinding ball mill machine consists of a hollow cylindrical shell rotating about its axis. The axis of the shell may be either horizontal or at a small angle to the horizontal. it is partially filled with balls. The grinding media is the balls, which may be made of steel (chrome steel), stainless steel or rubber. The inner surface of the cylindrical shell is usually lined with an abrasion-resistant material such as manganese steel or rubber.
 Working Principle
 The mining grinding ball mill machine`s main component is a cylinder with bigger diameter and smaller length which can revolve via the transmitting machinery. Materials are put in cylinder through the feed opening and then thoroughly grinded, because the falling course of iron balls and ores can produce huge falling impact and autogenous grinding. The continuous feeding of ores can create considerable pressure to make ores move from feed opening toward discharge opening. Finally, acceptable particles are discharged from the discharge opening. Acceptable ore particles are carried away by water by wet mill, or by air by dry mill. The discharge opening is equipped with a discharge grate, and the ore pulp horizon of discharge opening is low. These two factors prevent ores from being overly grinded, and iron balls from being dismissed. Under same circumstance, the processing capacity of energy-saving grate ball mill is bigger. Rolling bearings contribute enormous energy saving.
 Ball mill is essential and widely used equipment for raw material crushing. Its main component is a cylinder with bigger diameter and smaller length which is revolved by transmitting machinery. Materials are put in cylinder through the feed opening and then thoroughly grinded. 

The falling course of iron balls and ores can produce huge falling impact and autogenous grinding. The continuous feeding of ores can create considerable pressure to make ores move from feed opening toward discharge opening. Finally, acceptable particles are discharged from the discharge opening. Acceptable ore particles are carried away by water in wet mill, or by air in dry mill.
 Features
 1) Suitable for grinding material with high hardness
2) The shape of the final products is circular
3) No pollution for the powder with ceramic ball
4) Stable performance Easy installation
5) The capacity and fineness can be adjusted by adjusting the diameter of the ball.
 Technical Parameters

Model	The chamber speed(r/min)	Ball  Load (t)	Feed In Size (mm)	Feed Out Size (mm)	Capacity (t/h)	Motor Power (kw)	Weight (t)
900 ×1800	38	1.5	≤ 20	0.075-0.89	0.65-2	18.5	3.6
900 ×3000	38	2.6	≤ 20	0.075-0.89	1.1-3.5	22	4.6
1200 ×2400	35	3.5	≤ 25	0.075-0.6	1.5-4.8	37	11
1200 ×3000	35	5	≤ 25	0.075-0.4	1.6-5	45	13.8
1200 ×4500	35	7.5	≤ 25	0.075-0.4	1.6-5.8	55	14
1500 ×3000	27	8	≤ 25	0.075-0.4	2-5	75	15
1500 ×4500	27	12	≤ 25	0.075-0.4	3-6	95	18
1500 ×5700	27	15	≤ 25	0.075-0.4	3.5-6	130	21.7
1830 ×3000	24	12	≤ 25	0.075-0.4	4-10	185	28
1830 ×6400	24	23	≤ 25	0.075-0.4	6.5-15	210	34
1830 ×7000	24	25	≤ 25	0.075-0.4	7.5-17	245	36
2100 ×6500	21	31	≤ 25	0.075-0.4	14-26	355	52.8
2200 ×7000	21	37.6	≤ 25	0.075-0.4	15-28	400	56
2700 ×7000	18	61.8	≤ 25	0.075-0.4	18-35	710	73

Detailed Images




Company Information

Victor is a large mineral processing manufacturer for 15 years history, with covering an area of 48,000 square meters and 20,000 square meters for workshop, with various large modernized machinery facilities, professional R&D team and installation team. 

With 32% market share in China and the rest to overseas, already successfully exported to over 50 countries, such as USA, England, Australia, Brazil, Turkey, Italy, Russia, South Africa, Zimbabwe, Sudan, Ghana, Congo, Morocco, India,Indonesia, Malaysia, Philippines, North Korea, Mongolia, Vietnam, Thailand etc.

Our goal is to provide one-stop service for you and assist you to solve all problems from investment to his return in the field of mining,including the preliminary mineral analysis, mineral processing test, engineering design, equipment debugging and technical training etc.. 

We are expert especially at mining separating and lab mining plant, main products as below:

Gold trommel wash plant
Shaking table
Spiral chute separator
Centrifugal gold concentrator
Jig separator machines
Waste recycling machine
Grinding and mill crusher
Flotation cell machine
Magnetic separator
Laboratory mining plant


Package: FCL & LCL export standard container 20GP/40GP/40HQ. 

FCL: main machinery gold shaking table in nude package and bulk in container, spare parts in wooden box or as your special requirement
LCL: machinery are packed in steel frame, base and deck are separately packed. 

Shipping: by sea shipment, by air shipment or by courier express, it depends on you.

Payment Terms: T/T or L/C is preferable. T/T: 30% deposit and the balance before delivery 

We will take photos for your products when finished and show you before delivery. Also keep you informed for any updated information including shipping before you receive it, to let you rest assured. 

Delivery time: shipped in 15 days after payment


FAQ

1.How is the quality of your products? (mining equipment/machine)
Answer: Our products are manufactured strictly according to national and international standard, and we will take a test on every grinder before delivery.

2.Guaranteed?
Answer: All of our products are guaranteed for one year. If products quality is not consistent with the description as we
described or the promise before you place order, we promise 100% refund.

3.How about price?
Answer: For the complete same machine, we can promise our quality is the best when the price same as other competitors, and our price can be lowest when the quality at standard level.

4.Service and Payment Terms?
Answer: We can accept T/T and L/C; 30% deposit, 70% balance before delivery, which is international trade practice;Finished product pictures will provide to customers before delivery.


Our Service

1) Pre-sale service: Freely provide project designing, process designing, choosing suitable equipment for you.

2) Medium-sales service: Accompany you to complete the acceptance of the equipment, draft the construction scheme and detailed process, and complete process of export

3) After-sales service: Offer considerate technical guidance in installation, debugging and operators training. We are available at any time if you need.

Contact

JiangXi Victor International Mining Equipment Co.,Ltd
Tel/Fax: 86-797-5712751
Mob: +86 133 6177 9811
Add:Guzhang industrial park,Shicheng county,Ganzhou city,Jiangxi Province,342700,China.