Overview
Product DescriptionWet Ball Mill And Dry Ball Mill for mining grinding
Mine Ball Mills Model:
Overflow Ball Mill:φ 1.5x3.0~ φ8x12m ,Effective volume 7.5~194.3m3
Wet Grate Ball Mill:φ1.2x2.4~φ4x14m,Effective volume 2.2~157m3
Capacity:5-500 tph
ZTIC can produce cylinder diameter below 8m ball mills. The ball mill is mainly used for pulverizing ores and other materials, and widely used for ore dressing, building material, chemical industry and other industries.ZTIC manufacture a full range of Grinding Mills for the Mining Sector.
1.Mine Ball Mill Application:
A ball mill grinds ores and other materials to a typical product size of 35 mesh or finer.
The feed to a ball mill is prepared by...
· Single or multistage crushing and screening
· Crushing, screening, and/or rod milling
· Primary crushing and autogenous/semiautogenous grinding
Mine Ball Mill Normal feed sizes:
· 80% passing 1/4" (6 mm or finer) for hard ores
· 80% passing 1" (25 mm or finer) for softer ores
(Larger feed sizes can be tolerated depending
The length to diameter ratio of cylindrical mills range from 1 to 1 through 3 to 1. When the L/D ratio is 2 to 1 or greater, werefer to the mill as a Tube Mill.
The two most popular types of ball mills are
Model
Cylinder diameter | Cylinder length | Effective volume | Rotate speed | Max. ball loading capacity | Motor | Size (L×W×H) | Weight | Power | Speed |
| mm | mm | m3 | r/min | t | kw | r/min | m | t |
MQS12×24 | 1500 | 3000 | 5 | 26.6 | 9 | 95 | 742 | 6.4×2.9×2.6 | 18 |
MQS15×15 | 1500 | 1500 | 2.3 | 29.2 | 4.8 | 60 | 725 | 5.7×3.2×2.8 | 13.7 |
MQS15×24 | 1500 | 2400 | 3.7 | 29.2 | 7.6 | 90 | 730 | 6.9×3.3×2.8 | 16.5 |
MQS15×30 | 1500 | 3000 | 4.6 | 26.6 | 10 | 90 | 742 | 7.6×3.4×2.8 | 19.5 |
MQS21×30 | 2100 | 3000 | 9.4 | 22.1 | 20 | 220 | 740 | 8.5×4.65×3 | 45 |
MQS24×30 | 2400 | 3000 | 12.2 | 21 | 25 | 250 | 980 | 8.8×4.7×4.4 | 55 |
MQS24×70 | 2400 | 7000 | 26.66 | 21 | 54 | 475 | 740 | 14.3×5.8×4.4 | 67 |
MQS27×21 | 2700 | 2100 | 10.6 | 19.7 | 22 | 280 | 733 | 9.7×6.5×4.8 | 69 |
MQS27×36 | 2700 | 3600 | 18.5 | 20.5 | 39 | 400 | 187.5 | 12×5.8×4 | 74 |
MQS27×40 | 2700 | 4000 | 20.5 | 20.24 | 38 | 400 | 187.5 | 12.4×5.8×4.7 | 77 |
MQS27×60 | 2700 | 6000 | 34.34 | 19.5 | 53 | 630 | 589 | 12×5.7×4.5 | 84 |
MQS29×41 | 2900 | 4100 | 26 | 19.34 | 42 | 450 | 740 | 9.9×6.1×5.1 | 76.1 |
MQS31×64 | 3100 | 6400 | 43.7 | 18.3 | 56 | 1000 | 167 | 15.2×6.98×5.8 | 141 |
MQS32×31 | 3200 | 3100 | 22.65 | 18.3 | 46.9 | 500 | 167 | 13.9×7.3×6.0 | 109 |
MQS32×36 | 3200 | 3600 | 26.3 | 18.3 | 54 | 630 | 167 | 14.3×7.3×6.0 | 116.94 |
MQS32×40 | 3200 | 4000 | 29.2 | 18.2 | 60 | 710 | 980 | 14.7×7.3×6.0 | 121.4 |
MQS32×45 | 3200 | 4500 | 32.9 | 18.3 | 68.5 | 800 | 167 | 15.2×7.3×5.9 | 126.23 |
MQS32×54 | 3200 | 5400 | 39.4 | 18.3 | 81.6 | 1000 | 167 | 16.6×7.3×6.1 | 135.4 |
MQS36×45 | 3600 | 4500 | 41.4 | 17.25 | 86 | 1000 | 167 | 13.5×7.3×6.3 | 153.1 |
MQS36×60 | 3600 | 6000 | 54 | 17.3 | 112 | 1400 | 167 | 15.5×8.3×6.3 | 190.6 |
MQS36×85 | 3600 | 8500 | 79 | 17.4 | 144 | 1800 | 743 | 20×8.2×7.1 | 260.89 |
MQS40×60 | 4000 | 6000 | 69.8 | 16.0 | 126 | 1500 | 200 | 17.4×9.34×7.5 | 215.5 |
MQS40×67 | 4000 | 6700 | 76 | 16.0 | 155 | 1600 | 980 | 16×8.43×7.5 | 235.2 |
MQS40×13.5 | 4000 | 13500 | 157 | 16.5 | 280 | 3300 | 980 | 24.2×9.9×7.8 | 284/375 |
2.Main Technical Parameters of Overflow Ball Mill:
Model | Cylinder diameter | Cylinder length | Effective volume | Rotate speed | Max. ball loading capacity | Motor | Size (L×W×H) | Weight |
motor | speed |
| mm | mm | m3 | r/min | t | kw | r/min | m | t |
MQY15×30 | 1500 | 3000 | 5 | 26.6 | 9 | 95 | 742 | 7.4×3.4×2.8 | 18.5 |
MQY15×36 | 1500 | 3600 | 5.7 | 26.6 | 10.6 | 95 | 742 | 8.0×3.4×2.8 | 17.22 |
MQY18×61 | 1830 | 6100 | 13.4 | 24.5 | 24.6 | 220 | 736 | 10.2×5.1×4.0 | 37.3 |
MQY21×30 | 2100 | 3000 | 9.4 | 22.1 | 15 | 200 | 740 | 8.5×4.65×3 | 45 |
MQY24×30 | 2400 | 3000 | 12.2 | 21 | 22.5 | 250 | 980 | 8.8×4.7×4.4 | 55 |
MQY24×70 | 2400 | 7000 | 26.66 | 21 | 48 | 475 | 740 | 14.3×5.8×4.4 | 67 |
MQY27×36 | 2700 | 3600 | 18.5 | 20.5 | 39 | 400 | 187.5 | 9.8×5.8×4.7 | 61.34 |
MQY27×40 | 2700 | 4000 | 20.5 | 20.24 | 38 | 400 | 187.5 | 10.4×5.8×4.7 | 70 |
MQY27×45 | 2700 | 4500 | 23.5 | 20.5 | 43.5 | 500 | 187.5 | 12.5×5.8×4.7 | 76 |
MQY27×60 | 2700 | 6000 | 34.34 | 19.5 | 53 | 630 | 589 | 13.5×5.9×4.7 | 71.2 |
MQY28×54 | 2800 | 5400 | 30 | 19.5 | 55.2 | 630 | 167 | 13×5.83×4.7 | 97.8 |
MQY28×80 | 2800 | 8000 | 43 | 20 | 78.6 | 800 | 137 | 16.5×7.3×5 | 115 |
MQY30×11 | 3000 | 11000 | 69.2 | 17.3 | 100 | 1250 | 429 | 28.9×3.8×5 | 227.8 |
MQY32×36 | 3200 | 3600 | 26.3 | 18.3 | 48.4 | 500 | 167 | 14.3×7.3×6 | 116.94 |
MQY32×40 | 3200 | 4000 | 29.2 | 18.2 | 60 | 560 | 980 | 16.7×7.3×6 | 121.4 |
MQY32×45 | 3200 | 4500 | 32.9 | 18.3 | 60.5 | 630 | 167 | 13×7.0×5.82 | 124.23 |
MQY32×54 | 3200 | 5400 | 39.4 | 18.3 | 73 | 800 | 167 | 14.2×7.0×5.82 | 129 |
MQY32×64 | 3200 | 6400 | 46.75 | 18.3 | 86 | 1000 | 167 | 15.2×7.0×5.8 | 140 |
MQY32×75 | 3200 | 7500 | 55.5 | 18.3 | 102 | 1250 | 743 | 17.7×8.4×6.3 | 154 |
MQY32×90 | 3200 | 9000 | 64.2 | 18.3 | 106.6 | 1250 | 150 | 18.5.7.3×6 | 173 |
MQY34×45 | 3400 | 4500 | 37 | 18.4 | 74.6 | 800 | 167 | 11.5×7×6.1 | 129.8 |
MQY34×56 | 3400 | 5600 | 45.8 | 17.9 | 84.3 | 1120 | 985 | 16.7×7.6×6.3 | |
MQY36×45 | 3600 | 4500 | 41.4 | 17.25 | 76 | 1000 | 167 | 13×7.3×6.3 | 144.1 |
MQY36×50 | 3600 | 5000 | 46.7 | 17.5 | 85.96 | 1250 | 167 | 15×7.6×6.2 | 150 |
MQY36×50 | 3600 | 5000 | 46.7 | 17.3 | 85.96 | 1250 | 429 | 23×4.6×6.3 | 176 |
MQY36×56 | 3600 | 5600 | 55.4 | 17.76 | 106.3 | 1250 | 750 | 14.4×8×6.3 | 159.7 |
MQY36×60 | 3600 | 6000 | 55.7 | 17.3 | 102.5 | 1250 | 429 | 24×4.6×6.3 | 138.73 |
MQY36×60 | 3600 | 6000 | 54 | 17.3 | 102 | 1250 | 167 | 15.6×8.3×6.3 | 162.7 |
MQY36×61 | 3600 | 6100 | 55.36 | 17.76 | 106.3 | 1200 | 980 | 15.8×8.5×6.2 | 164.1 |
MQY36×85 | 3600 | 8500 | 79 | 17.4 | 131 | 1800 | 743 | 20×8.2×7.1 | 251.89 |
MQY36×90 | 3600 | 9000 | 83.5 | 17.4 | 138 | 1800 | 743 | 28×4.6×5.6 | 286 |
MQY38×67 | 3800 | 6700 | 70 | 16.5 | 130 | 1400 | 743 | 19×8.2×7.1 | 185.2 |
MQY40×60 | 4000 | 6000 | 69.8 | 16.0 | 126 | 1500 | 200 | 17.4×9.5×7.6 | 203.5 |
MQY40×67 | 4000 | 6700 | 78 | 16.0 | 136.3 | 1600 | 200 | 15.6×9.6×7.3 | 206.2 |
MQY40×135 | 4000 | 13500 | 155 | 16 | 233 | 3300 | 200 | 23×10×4.9 | 343 |
MQY43×61 | 4270 | 6100 | 80 | 15.67 | 144 | 1750 | 200 | 14×10×7.7 | 215.3 |
MQY50×64 | 5030 | 6408 | 120 | 14.4 | 251 | 2600 | 200 | 14.6×11×9.1 | 318.5 |
MQY50×83 | 5030 | 8300 | 152.3 | 14.4 | 266 | 3300 | 200 | 22×10.5×9 | 402.6 |
MQY55×65 | 5500 | 6500 | 143.3 | 13.8 | 264 | 3400 | 200 | 18.5×9.8×8.9 | 451.5 |
MQY50×85 | 5500 | 8500 | 187.4 | 13.8 | 335 | 4500 | 200 | 20.5×12×9.8 | |
MQY55×65 | 5500 | 6500 | 143.3 | 13.8 | 264 | | 3400 | 200 | |
MQY50×85 | 5500 | 8500 | 187.4 | 13.7 | 335 | | 4500 | 200 | |
MQY55×88 | 5500 | 8800 | 191.5 | 13.7 | | | | | |
MQY60×95 | 6700 | 9500 | 249.3 | 13 | | | | | |
MQY67×116 | 6700 | 11600 | 385 | 12.5 | | | | | |
MQY73×115 | 7300 | 11500 | 495 | 12 | | | | | |
MQY80×120 | 8000 | 12000 | 570.5 | 11.5 | | | | | |
Cement Ball mill is mainly used to grind the clinker and raw materials in cement industry and also can be applied in metallurgy, chemical, electric power and other industries to grind all kinds of ores. Cement ball mill is not only suitable for over-flow grinding, but also applicable for cyclic close-flow grinding together with powder collector.
Cement ball mill is an efficient tool for fine powder grinding. The Cement ball mill is used to grind many kinds of mine and other materials, or to select the mine. Cement ball mill is widely used in building material, chemical industry, etc. There are two ways of grinding: the dry way and the wet way. It can be divided into tabular type and flowing type according to different expelling mine.
NOModel (m) | Production capacity t/h | Speed r/min | Feed in size mm | medium load t | Effective volume | Main motor | Size | Weight (T) | Power kw | Voltage V | L | W | H |
1 | Φ2.2×6.5 | 13-14 | 22 | <25 | 31 | 21.4 | 380 | 6000 | 12385 | 5390 | 4210 | 53 |
2 | Φ2.2×11 | 15-16 | 21 | <25 | 50 | 36 | 630 | 6000 | 21559 | 4540 | 3520 | 109 |
3 | Φ2.2×13 | 16-18 | 21.5 | <25 | 60 | 43 | 630 | 6000 | 26079 | 4540 | 3520 | 114.2 |
4 | Φ2.4×8 | 15 | 20.8 | <25 | 45 | 30 | 560 | 6000 | 17215 | 5564 | 4540 | 82.53 |
5 | Φ2.4×13 | 20-23 | 19 | <25 | 65 | 51.7 | 800 | 6000 | 27580 | 4540 | 3620 | 138 |
6 | Φ2.6×13 | 30-32 | 19.6 | <25 | 80 | 60 | 1000 | 6000 | 20883 | 7740 | 5670 | 144.5 |
7 | Φ3×9 | 28-32 | 17.8 | <25 | 70-80 | 55 | 1000 | 6000 | 23568 | 4760 | 3670 | 138.7 |
8 | Φ3×11 | 36-40 | 18.9 | <25 | 100 | 69 | 1250 | 6000 | 27610 | 5720 | 4080 | 181.9 |
9 | Φ3×11 | 36 | 17.69 | <25 | 100 | 69 | 1250 | 6000 | 24567 | 7510 | 5968 | 156.5 |
10 | Φ3.2×11 | 40-45 | 17.4 | <15 | 90-100 | 78 | 1250 | 6000 | 28000 | 5720 | 3672 | 180 |
11 | Φ3.5×9.5 | 40 | 18 | <20 | 115 | 76.4 | 1400 | 6000 | 29717 | 5250 | 5000 | 194.4 |
12 | Φ3.5×11 | 45 | 17.2 | <15 | 116 | 78.5 | 1600 | 6000 | 28454 | 5350 | 5600 | 271.64 |
13 | Φ3.6×8.5 | 60 | 16.5 | <20 | 102 | 86 | 2500 | 6000 | 19693 | 4141 | 5404.5 | 233.3* |
14 | Φ3.8×9 | 70-80 | 16.5 | <20 | 130 | 94 | 2000 | 6000 | 28521 | 5550 | 5600 | 255.2 |
15 | Φ3.8×12.5 | 55 | 16.4 | <25 | 167 | 123.5 | 2500 | 6000 | 17419 | 10745 | 8204 | 301.4 |
16 | Φ3.8×13 | 60 | 16.3 | <25 | 173 | 128 | 2500 | 6000 | 19693* | 4141* | 5404.5 | 223.3* |
17 | Φ4.2×11 | 120 | 15.75 | ≤3 80%pass | 182 | 134.5 | 2800 | | 18500 | 4400 | 6500 | 256** |
18 | Φ4.2×11.5 | 130 | 15.99 | ≤3 80%pass | 199 | 138 | 2800 | 10000 | 18002 | 8962 | 7520 | 219** |
19 | Φ4.2×11.5 | 130 | 16 | ≤3 80%pass | 199 | 138 | 2800 | | 17259 | 4960 | 5600 | 220** |
20 | Φ4.2×12.5 | 85 | 16 | ≤25 90% | 210 | 151 | 3150 | | 18400 | 4960 | 8640 | 251** |
21 | Φ4.2×12.5 | 145 | 16 | ≤3 80% | 210 | 151 | 3150 | | 18400 | 4960 | 8640 | 242** |
22 | Φ4.2×13 | 75 | 15.6 | ≤25 90% | 209 | 157 | 3150 | | 174450 | 4880 | 8000 | 255** |
23 | Φ4.2×13 | 150 | 15.6 | ≤3 80% | 209 | 157 | 3150 | | 17445 | 4880 | 8000 | 256** |
24 | Φ4.2×13.5 | 80-85 | 15.8 | ≤25 90% | 230 | 164 | 3550 | | 17744 | 6700 | 6010 | 256** |
25 | Φ4.2×14 | 95 | 15.6 | ≤25 90% | 252 | 169 | 3550 | | 19055 | 20490 | 23200 | 220** |
26 | Φ4.2×14.5 | 95 | 15.8 | ≤25 80% | 250 | 178 | 4000 | | 5050 | 6700 | 11054 | 278** |
27 | Φ4.6×14 | 95-110 | 15 | | 285 | 185 | 4200 | 6000 | 23200 | 11054 | 6370 | 310** |
Physical & Chemical Identification Center
ZTIC owns a professional testing and metrology institute which provides advanced testing methods such as nondestructive testing, industrial chemical analysis, metallographic testing and analysis, mechanical testing, sample preparation, meter/length measurement, weighing apparatus verification, and weighman inspection. Our metrology institute has taken a leading role in China.
ZTIC owns nearly two hundred types of advanced testing equipment, nine different measurement standards and nearly twenty types of world-class testing equipment which have been imported from international locations such as Germany, Japan, USA, UK and Belgium.
Quality testing equipment
Spectrometer | Ultrasonic flaw detector | Carbon and sulfur analyzer |
X-ray detection apparatus | Brinell microscope | Leeb hardness tester |
After Sales ServiceFAQ
Q: Why we believe in luoyang zhongtai industries co., ltd:
A: 1. More than 30 years experience.
2.We are the leading professional supplier of mining machinery, construction machinery, machines casting and forged parts
3. All products achieved ISO9901:2000 quality management certificate and CE, ROHS certificates.
Q:Delivery time
A: parts lead time 1-2months, machines 2-3months.
Q:Payment terms
A: Accept payment type: T/T, L/C, Western union,Cash.
30% deposit when signed contract. Full payment paid before shipping
Q: Quality warranty?
A: guarantee time: one year for main machinery. If something wrong we will provide the technical advice and find solution immediately. For those wearing parts we guarantee high quality parts for long-term supply.
Q: After sales service?
A: we can supply technical guide for machines running test and parts maintenance if end user needs.